SwitchIT Demonstration

In this demonstration:


• One of the generators is started up and circuit breakers are closed so that it feeds across both boards.
• A second generator is then started up and automatically synced onto the board.
• A motor is started up and load sharing is demonstrated.
• Both transformers feeding to the Low Voltage are powered up and the Bus-Tie circuit breakers are closed
  to give a potential for multiple fault paths. System logic is demonstrated by automatically opening one of the Bus-Tie breakers to rectify this situation.
• The Bus-Tie is closed again and a feed from one of the Transformers is shut off to demonstrate bi-directional feeding across Bus-Ties.
• Load is set on the Low Voltage boards to demonstrate how the user can define the load a board puts on the system
• The Transformer circuit breaker is opened. This cuts the feed to everything down stream and demonstrated intertrips.
• The main Bus-Tie is opened to demonstrate load sharing between the generators.
• A generator is turned off to demonstrate loss of power and system shutdown.
• An Isolation and Earthing of a circuit breaker is performed.

Technaware Ltd. Website updated 22/02.2008